Heavy-duty black leather arm protection built for welders, fabricators, and skilled trades working around heat, sparks, spatter, and steel.
The Næxon 21” Black Welding Sleeves for Men & Women provide extended arm coverage for demanding welding and metalworking environments. Constructed from durable black leather and designed with approximately 21 inches of coverage, these sleeves help create a protective barrier between your arms and the heat, sparks, weld spatter, and abrasion encountered during hot work.
From fabrication shops to refineries, pipelines, power plants, shutdowns, and industrial construction sites, these sleeves are made for workers who need serious arm protection without automatically putting on a full leather welding jacket.
21 Inches of Extended Arm Protection
Welding sparks don’t stop at your gloves.
During pipe welding, overhead welding, structural work, and fabrication, sparks and spatter can travel across the wrists, forearms, elbows, and upper arms.
The 21-inch length provides extended coverage along the arm, helping protect areas commonly exposed when welding in difficult positions.
Whether you’re reaching overhead, welding underneath pipe, working at a fabrication table, or burning rod in the field, the added coverage puts durable leather between your arms and the work.
Heavy-Duty Black Leather Construction
Leather has been trusted by welders for generations for a reason.
The Næxon Welding Sleeves use heavy-duty black leather to provide a durable barrier against common welding hazards while standing up to the abrasion and abuse found around pipe, plate, structural steel, welding tables, and industrial equipment.
The black finish gives the sleeves a clean, rugged appearance that belongs in the same environment they were designed for:
Heat. Sparks. Steel. Work.
Heat, Spark & Spatter Protection
When you’re working close to an arc, your arms can be exposed to intense working conditions throughout the shift.
The leather construction helps shield the arms from:
• Welding sparks
• Hot weld spatter
• Radiant heat
• Grinding sparks
• Abrasion from steel and work surfaces
• Everyday wear encountered during fabrication and industrial work
The sleeves are designed to complement appropriate welding gloves, protective clothing, and other PPE required for the task.
Protection Without a Full Leather Jacket
There are jobs where a full leather welding jacket is necessary.
There are also jobs where you primarily need additional protection on your arms.
That’s where welding sleeves make sense.
Instead of covering the entire upper body with another heavy leather layer, the Næxon 21” Welding Sleeves concentrate protection on the arms while leaving the torso less restricted.
That makes them a practical option for welders who want extended arm coverage with greater freedom of movement.
Designed for Men & Women
The Næxon 21” Black Welding Sleeves are designed for both men and women working in welding, fabrication, and industrial trades.
Their straightforward sleeve design makes them easy to integrate with existing workwear and welding PPE.
Put them on when the work requires additional arm protection.
Get the job done.
Key Features
• Approximately 21-inch extended arm coverage
• Heavy-duty black leather construction
• Designed for men and women
• Helps protect against welding heat, sparks, and spatter
• Added protection against abrasion
• Covers the wrist, forearm, elbow, and toward the upper arm depending on fit
• Flexible sleeve-style construction
• Less upper-body bulk than a full leather welding jacket
• Rugged black industrial finish
• Designed for welding, fabrication, and metalworking
• Suitable for MIG, TIG, stick, and flux-core welding
• Built for demanding shop and field environments
Product Specifications
Product: 21” Black Welding Sleeves
Brand: Næxon
Color: Black
Material: Leather
Length: Approximately 21 inches
Style: Protective welding arm sleeves
Fit: Men & Women / Unisex
Protection Area: Arms
Primary Use: Welding, fabrication, metalworking, and appropriate hot-work applications
Built for Multiple Welding Processes
The Næxon 21” Black Welding Sleeves are suitable for a wide range of welding and metalworking applications, including:
• Stick/SMAW welding
• MIG/GMAW welding
• TIG/GTAW welding
• Flux-core welding
• Pipe welding
• Structural welding
• Shop fabrication
• Industrial maintenance
• Grinding and metalworking
• Appropriate cutting and hot-work operations
Built for the Trades
These sleeves were made for people whose work puts them around steel every day.
Welders. Pipefitters. Fabricators. Ironworkers. Boilermakers. Millwrights. Industrial maintenance crews.
Workers in these trades don’t always weld from a comfortable position at a clean table.
Sometimes the weld is overhead.
Sometimes it’s underneath the pipe.
Sometimes you’re squeezed into a rack.
Sometimes you’re working a twelve-hour shutdown shift and the next joint is wherever the next joint happens to be.
That’s why extended arm coverage matters.
Næxon Expert Guide: Welding Sleeves vs. Welding Jacket
Choosing between welding sleeves and a full welding jacket depends on the work and hazards involved.
A welding jacket provides broader protection across the arms and upper body.
Welding sleeves concentrate coverage on the arms.
For jobs where the arms receive significant exposure but full leather upper-body coverage isn’t required, removable welding sleeves can provide a practical alternative.
They can also be easily kept with your welding gear and added when the task changes.
More protection when you need it. Less unnecessary bulk when you don’t.
Made for Shop & Field Welding
At a fabrication table, you’re moving between fit-up, welding, grinding, and handling steel.
In the field, the conditions can change from one weld to the next.
You might be welding pipe in a rack, repairing equipment during a turnaround, working structural steel, or crawling underneath something that wasn’t designed with the welder’s comfort in mind.
The Næxon 21” Welding Sleeves are designed for both environments.
Compact enough to keep with your welding gear.
Rugged enough to bring to work.
Care & Maintenance
Inspect your welding sleeves before each use.
Check the leather and construction for excessive wear, burns, holes, severe cracking, or other damage that could compromise protection.
Remove loose dirt, grinding dust, and welding debris after use. If the leather becomes damp, allow it to dry naturally away from direct heat.
Store the sleeves in a dry location and avoid unnecessary exposure to moisture or chemicals that may damage the leather.
Replace damaged protective equipment when its condition can no longer provide appropriate coverage.
Frequently Asked Questions
How long are the Næxon Black Welding Sleeves?
They measure approximately 21 inches in length, providing extended coverage along the arms.
Are these welding sleeves for men and women?
Yes. They are designed as unisex welding arm protection for both men and women, subject to proper fit.
Are they made from leather?
Yes. This model uses durable black leather construction designed for demanding welding and metalworking environments.
Do they protect against welding sparks and spatter?
The leather provides a protective barrier designed to help shield the arms from common welding hazards including sparks, spatter, heat, and abrasion.
Can they be used for stick welding?
Yes. They can be used for appropriate stick, MIG, TIG, flux-core, and other welding applications.
Are they good for pipe welding?
Yes. The extended arm coverage can be especially useful when welding pipe from positions where the forearms and upper arms are exposed to sparks and spatter.
Can I use them for grinding?
They can provide additional arm coverage during appropriate grinding and metalworking operations. Always use all PPE required for the specific task.
Do welding sleeves replace a welding jacket?
No. Welding sleeves provide targeted arm coverage. A full welding jacket or other protective clothing may be required depending on the hazards and working conditions.
Safety Information
The Næxon Welding Sleeves should be used as part of a complete PPE system appropriate for the work being performed.
Always use the required welding helmet, safety glasses, gloves, protective clothing, footwear, respiratory protection where necessary, and any additional PPE required by your employer, jobsite, or applicable safety standards.
Inspect protective equipment before use and discontinue use if damage could compromise its protective function.
Built Between You and the Heat
Welding gear isn’t supposed to stay perfect.
It’s supposed to work.
It’s supposed to get scratched.
It’s supposed to get dirty.
It’s supposed to show up for the next weld.
The Næxon 21” Black Welding Sleeves were built with that mentality—extended leather arm protection for the men and women who spend their days around heat, sparks, steel, and the arc.
21 inches of coverage. Heavy-duty black leather. Built for real welding work.
NÆXON — BUILT FOR THE HARDEST WORKERS ON EARTH.
