Heavy-duty leather where you need protection. Flexible construction where you need movement.
The Næxon 21” Black & Split Leather Welding Sleeves for Men & Women are designed around a simple idea: put heavier leather protection where welding exposure demands it most.
This design combines a black sleeve construction with strategically positioned split-leather protective sections, creating extended arm coverage for welders, pipefitters, fabricators, and industrial craftsmen working around heat, sparks, spatter, and steel.
Instead of making the entire sleeve from heavy leather, the combination design concentrates rugged split leather in high-exposure areas while maintaining a more practical, flexible construction throughout the rest of the sleeve.
Protection Where You Need It
Not every part of your arm receives the same exposure during welding.
The areas facing the arc, sparks, and hot spatter often take the abuse.
That’s the thinking behind the Næxon Black & Split Leather Welding Sleeves.
Split-leather reinforcement is positioned where additional protection is needed, creating a durable barrier over high-exposure areas while avoiding unnecessary heavy leather across the entire sleeve.
More protection where it counts.
Less unnecessary bulk where it doesn’t.
21 Inches of Extended Arm Coverage
At approximately 21 inches long, these sleeves provide extended coverage from the wrist across the forearm and elbow toward the upper arm, depending on individual fit.
That additional coverage becomes especially important when you’re:
• Welding overhead
• Burning rod underneath pipe
• Working inside pipe racks
• Fabricating at a welding table
• Grinding and fitting steel
• Welding structural components
• Working from awkward positions
When the position changes, sparks can hit areas that shorter protection leaves exposed.
The 21-inch design helps cover more of the arm.
Black & Split Leather Combination Construction
The combination design brings together two priorities: protection and mobility.
The black body provides the foundation of the sleeve, while split-leather sections reinforce areas where welders commonly need additional protection against sparks, spatter, heat, and abrasion.
Split leather is well suited to demanding welding environments because of its rugged surface and ability to stand between the worker and the everyday abuse of hot work.
Instead of simply adding more material everywhere, the design puts it where it serves a purpose.
Heat, Spark & Spatter Protection
Welding puts your arms close to heat and flying material throughout the workday.
The leather reinforcement helps create a protective barrier against common welding hazards such as:
• Welding sparks
• Hot weld spatter
• Radiant heat
• Grinding sparks
• Abrasion against pipe and plate
• Contact with rough steel surfaces
• Everyday wear in fabrication and industrial environments
The sleeves are designed to complement appropriate welding gloves, protective workwear, and other PPE required for the task.
Heavy Protection Without Making Everything Heavy
There’s a tradeoff with welding PPE.
More material can mean more protection—but it can also mean more weight, heat, and restriction.
The Næxon combination design approaches the problem differently.
Instead of covering the entire sleeve with the same heavy material, split leather reinforces the areas where protection is most valuable.
This creates a welding sleeve designed to balance protection with practical movement during long workdays.
Heavy where it matters. Practical everywhere else.
Designed for Men & Women
The Næxon 21” Black & Split Leather Welding Sleeves are designed for working men and women across welding, fabrication, construction, and industrial trades.
The sleeve-style design makes them easy to integrate with existing workwear and welding PPE while providing additional arm coverage when the job requires it.
Key Features
• Approximately 21-inch extended arm coverage
• Black combination sleeve design
• Split-leather protective reinforcement
• Reinforced protection positioned in high-exposure areas
• Designed to help protect against welding heat, sparks, and spatter
• Additional abrasion protection around steel and work surfaces
• Designed to balance protection, mobility, and comfort
• Less unnecessary heavy leather than an all-leather sleeve design
• Extended wrist-to-upper-arm coverage depending on fit
• Designed for men and women
• Suitable for MIG, TIG, stick, and flux-core welding
• Built for shop, field, fabrication, and industrial environments
• Rugged Næxon construction
Product Specifications
Product: 21” Black & Split Leather Welding Sleeves
Brand: Næxon
Color: Black with Split Leather Reinforcement
Construction: Combination design with strategically placed split leather
Length: Approximately 21 inches
Style: Reinforced protective welding arm sleeves
Fit: Men & Women / Unisex
Protection Area: Arms
Primary Use: Welding, fabrication, metalworking, and appropriate hot-work applications
Built for Multiple Welding Processes
The Næxon Black & Split Leather Welding Sleeves can be used across a variety of welding and metalworking applications, including:
• Stick/SMAW welding
• MIG/GMAW welding
• TIG/GTAW welding
• Flux-core welding
• Pipe welding
• Structural welding
• Shop fabrication
• Industrial maintenance
• Grinding and metalworking
• Appropriate cutting and hot-work operations
Built for Welders Who Actually Move
Real welding doesn’t happen in one position.
You’re underneath the pipe.
Then you’re above it.
Then you’re fitting the next joint.
Then you’re grinding.
Then you’re crawling somewhere nobody considered when the equipment was designed.
Heavy protection is important, but so is being able to work.
That’s why the combination construction makes sense.
Put durable split leather where the sparks and heat are most likely to hit. Keep the rest of the sleeve practical enough to move with the worker.
That’s protection designed around the job instead of the catalog.
Næxon Expert Guide: Why Split Leather?
Split leather has been used throughout welding gear because its rugged construction makes it well suited for environments involving sparks, spatter, heat, and abrasion.
But that doesn’t necessarily mean every inch of a welding sleeve needs the same amount of heavy material.
Strategically incorporating split leather allows additional protection to be concentrated in high-exposure areas.
The result is a simple philosophy:
Leather protection where it’s needed.
That’s the purpose behind this Næxon combination sleeve.
Combination Sleeves vs. Full Leather Sleeves
Both designs have their place.
Full leather sleeves provide heavy leather coverage across most or all of the arm and may be preferred when exposure is consistently high.
Combination sleeves take a more targeted approach, using leather reinforcement in areas where additional protection is needed while reducing unnecessary heavy material elsewhere.
For welders working long shifts, changing positions, fitting, grinding, and moving constantly throughout the day, the combination design can provide a practical balance between coverage and mobility.
The correct choice ultimately depends on the hazards of the specific job.
Built for Pipefitters, Welders & Fabricators
These sleeves are made for the people working around steel every day.
Welders. Pipefitters. Fabricators. Ironworkers. Boilermakers. Millwrights. Maintenance crews. Industrial craftsmen.
The people who know the weld isn’t always waist-high on a clean table.
Sometimes you’re underneath it.
Sometimes you’re reaching over it.
Sometimes you’re twelve hours into a shutdown and still burning rod.
That’s where work gear proves what it was built for.
Care & Maintenance
Inspect the sleeves before each use, paying particular attention to the split-leather reinforcement, seams, and other high-wear areas.
Remove loose welding debris and grinding dust after use. If any leather becomes damp, allow the sleeves to dry naturally away from direct heat.
Replace the sleeves if burns, holes, severe wear, damaged seams, or other deterioration could compromise their protective function.
Store in a clean, dry location when not in use.
Frequently Asked Questions
How long are the Næxon Black & Split Leather Welding Sleeves?
They are approximately 21 inches long, providing extended coverage along the arms.
What is different about this version?
This version combines a black sleeve construction with strategically positioned split-leather reinforcement for additional protection in high-exposure areas.
Why not make the entire sleeve from heavy leather?
The combination design is intended to concentrate heavier protection where it’s needed while reducing unnecessary material elsewhere for improved practicality and movement.
Are these designed for men and women?
Yes. They are designed as unisex welding sleeves for men and women, subject to proper fit.
Do they help protect against welding sparks and spatter?
Yes. The leather-reinforced areas are designed to provide a barrier against common welding hazards including sparks, spatter, heat, and abrasion.
Can they be used for stick welding?
Yes. They can be used for appropriate stick, MIG, TIG, flux-core, and other welding applications.
Are they suitable for pipe welding?
Yes. The 21-inch extended design and targeted leather protection make them particularly useful for welding and fabrication where arm position and exposure change throughout the job.
Do these replace a welding jacket?
No. These sleeves provide targeted arm protection. Full protective clothing and additional PPE should be selected according to the hazards of the specific operation.
Safety Information
Welding sleeves are one component of a complete welding PPE system.
Always wear appropriate welding gloves, eye and face protection, protective clothing, footwear, respiratory protection where required, and any additional PPE specified by the task, employer, jobsite, or applicable safety requirements.
Inspect protective equipment before each use and discontinue use if damage could compromise protection.
Protection Where It Matters
More material isn’t automatically better design.
Putting the right material in the right place is.
The Næxon 21” Black & Split Leather Welding Sleeves were designed around that principle.
Extended arm coverage.
Rugged split-leather reinforcement.
Protection concentrated where welding puts your arms closest to the heat.
And a combination construction designed to keep you moving through the workday.
Leather where you need it. Protection where it matters. Built for the work.
NÆXON — BUILT FOR THE HARDEST WORKERS ON EARTH.
