Heavy-duty split leather. Extended arm coverage. Built for welders who work in the heat.
The Næxon 21” Split Leather Welding Sleeves for Men & Women are built for demanding welding, fabrication, and industrial work where your arms are constantly exposed to sparks, spatter, heat, and rough steel.
Constructed from durable split leather with approximately 21 inches of extended coverage, these sleeves create a rugged protective barrier from the wrist across the forearm and elbow toward the upper arm.
No camo. No combination construction. Just straightforward split-leather protection designed for working around the arc.
Heavy-Duty Split Leather Construction
Split leather has long been used in welding protection because its rugged construction is well suited for demanding hot-work environments.
The Næxon Welding Sleeves use split leather throughout the protective sleeve design, providing a substantial barrier between the worker’s arms and common welding hazards.
Whether you’re burning rod, welding pipe, fitting steel, grinding, or working around a fabrication table, the leather is there to take the abuse instead of your arms.
21 Inches of Extended Arm Coverage
Welding exposure doesn’t end at your wrists or forearms.
When you’re welding overhead, underneath pipe, inside a rack, or from an awkward position, sparks and spatter can travel across the elbow and farther up the arm.
At approximately 21 inches long, the Næxon Split Leather Welding Sleeves provide extended coverage designed to protect more of the arm.
Depending on individual fit, the sleeve extends from the wrist across the forearm and elbow toward the upper arm.
Heat, Spark & Spatter Protection
Welding puts your arms close to the work.
The split-leather construction helps create a durable protective barrier against common hazards encountered during welding and fabrication, including:
• Welding sparks
• Hot weld spatter
• Radiant heat
• Grinding sparks
• Abrasion against steel and work surfaces
• Everyday wear in fabrication and industrial environments
The sleeves are designed to be used alongside appropriate welding gloves, protective clothing, and other required PPE.
Made for Welding
These aren’t general-purpose fashion sleeves with a welding label added to them.
They’re built around the conditions welders actually encounter.
Hot steel.
Grinding dust.
Flying sparks.
Rough pipe.
Welding tables.
Long shifts.
The split-leather construction provides rugged arm coverage designed for exactly that environment.
Protection Without a Full Welding Jacket
A full leather welding jacket provides extensive upper-body protection, and some jobs require exactly that.
But when additional protection is primarily needed along the arms, welding sleeves provide another option.
The Næxon 21” Split Leather Welding Sleeves concentrate heavy-duty leather coverage along the arms without adding a full leather layer across the torso.
That makes them practical for certain welding and fabrication operations where extended arm protection is needed without the additional coverage of a complete leather jacket.
Key Features
• Approximately 21-inch extended arm coverage
• Heavy-duty split-leather construction
• Designed for men and women
• Helps protect against welding heat, sparks, and spatter
• Durable abrasion protection
• Extended wrist-to-upper-arm coverage depending on fit
• Rugged construction for demanding welding environments
• Sleeve-style protection without full-jacket coverage
• Suitable for MIG, TIG, stick, and flux-core welding
• Designed for shop and field welding
• Built for fabrication and industrial metalworking
• Professional Næxon welding gear
Product Specifications
Product: 21” Split Leather Welding Sleeves
Brand: Næxon
Material: Split Leather
Length: Approximately 21 inches
Style: Heavy-Duty Protective Welding Arm Sleeves
Fit: Men & Women / Unisex
Protection Area: Arms
Primary Use: Welding, fabrication, metalworking, and appropriate hot-work applications
Built for Multiple Welding Processes
The Næxon 21” Split Leather Welding Sleeves can be used across a range of welding and metalworking applications, including:
• Stick/SMAW welding
• MIG/GMAW welding
• TIG/GTAW welding
• Flux-core welding
• Pipe welding
• Structural welding
• Shop fabrication
• Industrial maintenance
• Grinding and metalworking
• Appropriate cutting and hot-work operations
Built for the Skilled Trades
The Næxon Split Leather Welding Sleeves are built for welders, pipefitters, fabricators, ironworkers, boilermakers, millwrights, industrial maintenance crews, and skilled tradespeople working around heat and steel.
Because real welding doesn’t always happen at a clean table.
Sometimes you’re underneath the pipe.
Sometimes you’re reaching overhead.
Sometimes you’re inside a rack with sparks coming back at you.
Sometimes you’re welding joint after joint through a twelve-hour shutdown shift.
That’s when protective gear earns its place in your gang box.
Næxon Expert Guide: Why Split Leather for Welding?
Welding PPE needs to withstand an environment very different from ordinary workwear.
Split leather provides a rugged material barrier suited to the sparks, spatter, heat, and abrasion commonly encountered during welding.
Its durable surface also makes it practical around pipe, plate, structural steel, fabrication tables, and other abrasive work environments.
For workers who want substantial leather coverage across the arms, an all-split-leather sleeve offers a straightforward approach:
Heavy-duty material from one end of the sleeve to the other.
Split Leather vs. Combination Welding Sleeves
The difference comes down to construction.
A combination welding sleeve uses different materials or strategically positioned leather reinforcement to balance protection with weight and flexibility.
The Næxon Split Leather Welding Sleeve takes the traditional approach by using split leather throughout the sleeve’s protective construction.
That makes this version ideal for workers looking for straightforward, heavy-duty leather arm protection rather than a mixed-material design.
Which design is appropriate depends on the work, exposure, working conditions, and PPE requirements of the job.
Shop. Pipeline. Refinery. Power Plant.
These sleeves aren’t tied to one type of welding.
They’re designed for the environments where industrial craftsmen work every day.
Fabrication shops.
Pipeline projects.
Refinery turnarounds.
Power plant outages.
Industrial maintenance.
Structural steel.
Field construction.
Wherever the work puts your arms around sparks, hot metal, and rough steel, durable arm protection matters.
Care & Maintenance
Inspect the sleeves before each use.
Check the split leather and seams for burns, holes, excessive wear, severe cracking, or other damage that could reduce protection.
Remove loose dirt, grinding dust, and welding debris after work.
If the leather becomes damp, allow it to dry naturally away from direct heat.
Store the sleeves in a clean, dry location when not in use and replace them when excessive wear or damage could compromise their protective function.
Frequently Asked Questions
What are the Næxon Welding Sleeves made from?
This version is constructed from heavy-duty split leather.
How long are the sleeves?
They are approximately 21 inches long, providing extended coverage along the arms.
Are these a combination-material sleeve?
No. This version is designed around split-leather construction rather than the black combination or camo versions.
Are they designed for men and women?
Yes. They are designed as unisex welding arm sleeves for men and women, subject to proper fit.
Do they protect against sparks and spatter?
The split-leather construction is designed to provide a protective barrier against common welding hazards including sparks, spatter, heat, and abrasion.
Can they be used for stick welding?
Yes. They can be used for appropriate stick, MIG, TIG, flux-core, and other welding operations.
Are they good for pipe welding?
Yes. Their extended leather coverage can be particularly useful for pipe welding and fabrication where sparks and spatter may reach the forearms, elbows, and upper arms.
Do they replace a welding jacket?
No. Welding sleeves provide targeted arm protection. A full welding jacket or additional protective clothing may be required depending on the hazards of the job.
Safety Information
The Næxon Split Leather Welding Sleeves are one component of a complete PPE system.
Always wear the appropriate welding helmet, safety glasses, gloves, protective clothing, footwear, respiratory protection where required, and any additional PPE specified for the task or workplace.
Inspect all protective equipment before use and discontinue use if damage could compromise protection.
No Gimmicks. Just Leather Between You and the Arc.
Some welding gear needs a long explanation.
This doesn’t.
21 inches of heavy-duty split leather between your arms and the work.
Built for sparks.
Built for spatter.
Built for heat.
Built for steel.
The Næxon 21” Split Leather Welding Sleeves are made for the men and women who know that welding gear isn’t supposed to stay clean.
It’s supposed to do its job.
NÆXON — BUILT FOR THE HARDEST WORKERS ON EARTH.
